New Desktop

I like new ideas. They take hold in my mind and percolate slowly, but constantly. I was given the idea of making a desktop rbs that tipped back and forth, with the marble rolling back and forth as the track itself tipped up and down. I did make one and it wasn't exactly what I had hoped for. So it sat. I showed it to my machinist, Bill, and he was all for making more of the motor mounts. Who was I to say no? So in a few days I had 8 new motor mounts with very nice machined aluminum center nose pieces.

Last week I went to San Francisco to deliver a sculpture - wall mounted #82;

And, Aaron, the lucky recipient of #82 had three sculptures from Stan Bennett a kinetic artist that lives in Ferndale, Ca. Stan's sculptures used a rotating arm to lift the marbles. Actually they used several in a row to get the balls from the bottom back to the top. I was so impressed with the arms, that I went home and used one of my new motor mounts for this type of lift, the ARM lift.

So here it is. Under the hood, it is still a basic desktop with a tetrahedron frame. But this baby has three tracks, is 26" wide X 18" high X 19" deep and is automatic.

Check out the video:

Catching up.

Hey Everyone. I wanted to dust off the blog and post something before it's been two months between posts... I know, I know, I need to post more often, and I think about my blog often, but it just does not make it from my brain to my keyboard. So for all of you regular readers out there, I apologize that I do not post more often. I have been busy with projects and have finished a few things since my last post and I aim to correct my lack of postings starting with this one. : )

I've since built several wall mounted RBS's. This one: http://www.youtube.com/watch?v=oOelpqNLT8A #79 and this one: http://www.youtube.com/watch?v=9iSm9TVWUvc #81.

Now these two wall mounted sculptures have a little story behind them. When I built #79 the buyer wanted a sculpture like #69 (http://www.youtube.com/watch?v=BSpbsehaJLw) - and I didn't clarify with the buyer exactly what he wanted... So I built him a wall mounted the same size and with the same one slow track. It came out fine, but when I talked to Greg he was a little less than happy and explained to me that he wanted a copy of #69. Apprehensive, Greg asked what we could do...I cheerfully explained I'll just make you another. And that's #81. If you look, it is a pretty close approximation of #69, maybe even a little better... : )

So I sold #79 made him #81 and Everyone was happy!
And for anyone who is following my progess on sculptures, #80 is on hold for the moment.

Next post soon, I promise!

Wall Mounted #81
Battery Powered

Wall Mounted #79

Going Home

Ooooooh Yeeeahhhhh, this is what I want for Christmas!!!

I dunno....if you got going really, really fast inside this tube (especially at the beginning) you'd be beat up pretty bad, if not dead. I'd still try it.

Making nylon bearings

I wanted to share with you how I make my nylon bearings. I have gone through several different kinds of "pivots" for elements on my sculptures and these have proven to be the best. I start with a rod of 1" acetyl plastic. I get 4ft lengths. First I cut the rod into sections 1.125" long. This will allow me to take face off side of the bearing without making it less than 1" wide. "Facing" makes the end (face) smooth and flat.

(above) Here is some of the plastic pieces I am left with after cutting the rod into lengths.

(Above) Here's the part chucked into the lathe.

(above) This photo shows the first side of the part with the chamfer. Once I did all of the parts on one side, then I set my stop, and did the other side. With the tool shown I cut the chamfer, and faced the end so it was smooth.

(above) The center drill. The center drill just cuts a small hole to make sure the drill bit cuts true in the next step.

(above) Now I will drill the hole. It's drilled 1/64th under 3/8" (the OD of the bronze bearing)
(above) Now the final drilling step, the reamer. Since plastic "closes" on you after you've cut it, the reamer gets the plastic closest to the size you want without going over, or being too small.

Finally, here is the bronze bearing inserted into the plastic. The bearing on the left is to show you the bearing halfway in, and the bearing on the right is all the way in. I've still got more than a hundred to go. My son, who is 10, has drilled more than 20. I think he could do them all.... Who says child labor is wrong?

Desktop #32 and #33

I posted quite a while ago about the 5 frames and accessories that I made up in advance for desktops. #29, #30 and #31 can be seen below in an older posting. These desktops just seem to keep getting better and better. It's all about practice. The more I make, the easier it is to build and the easier it is to add new things. Now these two desktops don't have anything new, per say, but both have some very nice track. I like track. Track is the fun space between elements.

What is noteworthy of these two desktops is why they were made. Desktop #32 was ordered by a woman for her mom's birthday. Great! I love to think of people opening their gift and receiving one of my sculptures! And just to make things interesting, desktop #33 was ordered by and man for his dad's birthday. Two in a row for b-days! Cool!

So to make these special I added a heart shape to the spinner for the mom, and the initial "S" (stands for the last name) for the dad.

Happy Birthday Everyone!

Desktop #32 (a gift for someone's Mom)


Desktop #33 (a gift for someone's Dad)

#78 Finished

Well, I need to start posting more than once a month. : ) The best time to start is now!

This is the finished sculpture #78. It measures 30" square and 36" tall. There are 3 different tracks. Almost finished...It still needs the acrylic case that will cover this piece so it will be safe while unattended in the law firm's waiting area.

Track 1 is the loop d' loop track, track 2 has a marble collector which tips when the 3rd marble rolls on (then the three roll off together), and track 3 has several cool elements that it activates. The picture below shows the first section of the loop d' loop.

Here (below) is the second section to the loop d' loop. The marble, after exiting the loops, turns to the left and joins with track 3 before heading back to the lift.

This picture (below) shows the chain lift - lifting a yellow marble. The chain lift picks up and releases about 3 marbles per minute.

Here is a photo showing a couple marbles in motion.
In this picture (below) you can see the "Scales of Justice". The scales are really cool to watch. The scales will tip when the third marble rolls into the side closest in this photo. The other side has several smaller marbles to provide the counter weight so it will reset itself when the other marbles roll out. It tips with 3 marbles but is inconsistent with how many marbles are dumped out. Sometimes only one marble goes, mostly two marbles will dump out, and then sometimes all of them dump.
See the marble collector at the top of the photo.
And as you can see, (below) this sculpture will be going to the law offices of Kam, Ebersbach and Lewis. They are trial lawyers.

All pictures clickable. See this sculpture in motion here:

Getting Personal

There's nothing like having your own RBS. Better than that, there's nothing like having it personalized so it says, "Look at Me! I belong to (you)". My next project will be located in the office (lobby?) of a lawyer, located in Georgia. As you can see from the photo below, the law firms name is Kam, Ebersbach & Lewis - Trial lawyers.
To make the letters I welded wire into a square, 3.125" high X 2" wide. I then cut the wires for the letters and fit them into the wire square to make sure they were all the same height and width. The B's S's and R's are the hardest because they all have curves.

Below you can see the names after they were installed in the sculpture. I made sure that I added them first so I had plenty of room for them, and I didn't weld myself into a corner, so to speak. When somebody comes in to his office, they will have no doubt of who this sculpture belongs to, or where they are.


To also reinforce the idea of a lawyers office, I also constructed a "scales of justice". This element interacts with the marbles. The right side of the scales has a permanent number of marbles. The right side of the scale does not lose or gain any marbles (unless you change it by hand), it is the counter-weight side. The left side will have a track to feed it and when the left side has one more marble than the right it will tilt down to the left and drop the marbles onto the large receiving plate below. There are a couple things that made this tricky. One is that I had to come up with some way to make the left side tip the marbles out when it dropped down to dump the marbles. To do this I attached a 1/16" wire to the back of the left plate. When it gets full (one more marble than the right side) and drops, this wire catches after a couple inches of downward travel and provides the lift needed at the back to tip the marbles out the front. The ring that is around the chain is there to keep the left side from swinging around too much after the marbles have rolled out. It would be bad for it to swing around too much and catch one of the ball pick-ups on it's way down.

Next up: Motorized table sculpture 30x36 - #78

My next project, in progess now, is a table standing sculpture with a chain lift that stands 36" tall and is 30"w on each side. I only have the frame and lift built now...but I think it already looks great! This sculpture (will have) 3 tracks. These tracks will be my "standard" fare of: one track will be a loop d' loop, one track will have one marble rolling at one time, and the third track will have a marble collector so the marbles (probably 3) on that track roll together when the collector releases them.

This sculpture will have a couple items to personalize it for it's final location. The final location will be a lawyers office in Georgia. So to help visualize the lawyer theme I am going to make a "scales of justice" element. This element will be a ball collector, but not "the" ball collector which will be added near the top for maximum effect. The single marble will roll onto one side of the scales - tipping when it gets full. The other side of the scale will have marbles as the counter weight. The other personalization will be the Law Firms name spelled out in wire inside the sculpture. Under each name, I am going to add "marbles on track" as if the marbles are underlining the names on the shingle.

More pics later.....

Wall Mounted #79 - completed

I just finished a wall mounted RBS. (click picture to view larger image) This one measures 33"w X 22"h and has a spiral/helical lift to transport the marbles from the bottom to the top. Something new is the adjustable speed of the lift. I purchased a "universal" DC power supply which has switchable voltage. You can choose from 3v - 4.5v - 6v - 7.5v - 9v and 12v giving you 6 different speed settings. (I say 4 speeds in the video because there isn't much difference between 3v and 4.5v or 6v and 7.5v) It's as easy as switching the voltage up or down to see it go slower or faster. Interestingly enough, Low (3v) has 1 marble going, (4.5v) has just about 2 marbles, (6v) sports 3 marbles rolling at the same time, and (12v) gives you 4 marbles.

One long continuous track, this sculpture is very smooth and quiet. See the video below to see it in motion. Oh, and if you are interested, this one is for sale: $1250 includes shipping in custom wooden crate within US. : )

A trio of new desktops: #29 - #30 - #31

I really like desktops. They are fun to make because they do not take a long time to build, I can see right away how new improvements work, and I can try new things without having to worry too much about changing it if needed. These three were made in a row. I started out making 5 frames with the marble queue built onto the top, 5 arms and 5 track splitters. Then I worked one by one finishing them. I still have two left, but not the time to complete them now. It will be a few weeks before I get any more of these built.

The finger operated marble release is a somewhat new thing. I have added it to other desktops - but not for quite some time. I decided that to be really cool, they definitely need one. All of the marbles can be kept at the top of the sculpture and can be released one by one, or all at once, whenever you like. This eliminates the pesky chore of reaching out and placing marbles at the top each and everytime you want to see it run. If it is just you around, your toe could operate this kinetic desk toy when your relaxin' on the couch.

These sculptures are made from 100% stainless steel. They are neatly and durably TIG welded. 1" colorful glass marbles.

Desktop #31

Desktop #30

Desktop #29

Desktop #28

Really, this desktop should be #27, because it was made before...But as these numbering things go...I mean shoot...who really cares anyway? It's only off one number. But enough of that. This desktop was "commissioned". I had someone in mind when I started on it. This desktop is different in that I made an effort to leave the track spacing a little wider than normal. I have track clamps that are spaced at 7/8" that I use for loop d' loops with my larger marbles (1-3/8"). I use these for my desktops and squeeze the spacers a little to make them usable for the smaller 1" marbles. Leaving the spacing wider than in the past helps make the marble go slower, and in turn, make the action last longer.

There are three tracks on this desktop. My previous desktop had 4 tracks; two loop d' loop tracks, 1 tall spiral and 1 long track with elements. The person requesting this current desktop didn't much care for the teeter totter, or the loop d' loops (he said they go too fast). So I made this one with extra track, since that was what they wanted. In fact I was so focused on the track I almost didn't have room to add the tipping arm and spiral that are connected on the same track. But, with a little "can do" attitude, I got it to work. : )

The last thing I have changed for the better is where I merge tracks. I have found that using a little bit of plate eliminates the need for lots of wire. When one track dumps into another, the ball has to get over the rail onto it's new track. Now, this is not a problem if I have some vertical room to use. If I don't, then I have to use several wires to keep the ball moving, and not make a spot where the marbles can settle before merging. With the plate, that problem is eliminated completely and easily.

I don't have a snapshot handy, but here's the video on youtube:

Wall hanging RBS #77, in progress

I am currently working on a wall hanging sculpture that measures 36" high by 24" wide. It has a chain lift that lifts 1-3/8" marbles at the rate of about 5 1/2 per minute. There are three tracks in this RBS. The loop d' loop is split between two different tracks instead of being a single path from top to bottom. Both of the built tracks in the pictures have just one marble on each track. The last track, still to be built, has a ball collector which will tip when it has 4 marbles. That track will be fast and slow, zipping about the sculpture with the marbles in a row. The marbles in a row are fun to watch because sometimes the marbles stay together, sometimes they spread out. It depends on the size of the marbles whether they stay together or not. Check out the pictures to see this sculpture as it comes together.

Desktop #27

So here's my latest desktop. #27. It's 22" high by 18" deep/wide and has two tracks. This desktop has all the usual fun stuff such as; track splitter, 3 loop - loop d' loop, tipping arm, ring spinner, spiral and over 25ft of two rail track. On this desktop I decided to add a finger release. The finger release is a great way to play with your sculpture without having to reach out and place marbles at the top every time. Instead, place all the marbles at the top where they stay until your press the lever to release one, or all. Place the sculpture out of reach, and you could use your toe to release them during commercials. : )

So here's a couple pics, and the video I have uploaded to YouTube.

Completed sculpture #76

This is my latest project. It stands 5ft high and is 3.5ft wide on each side. A chain lift brings the balls back to the top and releases them into the 4 tracks on this sculpture. This sculpture has several fun elements. First is the Plinko Track Scrambler. 3 of the 4 tracks go into this element and the marbles mix up, taking one of the 3 tracks exiting. The fun part is watching the balls bounce around randomly before dropping off and continuing on the stainless steel paths. The loop d' loop has 7 inversions, and jumps into a basket. See the video of the sculpture here:



One of the paths goes into the Ferris Wheel Lift. The 1-3/8" marble is directed around the outside of a large 12" ring. The ring has tines that catch the marble, and allow the marble to spin the wheel. When the wheel spins there is a smaller ring on the inside that lifts 1" marbles, about 4 inches, onto their own small path. They race out and around before returning to the lift. I have only made two of these elements, this being the second one. I spent a lot of time turning this one over in my head to make sure it was built correctly. I think it came out just right. The most complicated part to making this element was getting the bearing exactly in the center of the large ring. Once that was accomplished, the rest was easier, but no less important. Building slow, is the key to building something like this. Below is a video of the Ferris Wheel Lift.

Honey Creek Radio

My Dad has started an online radio station with Live 365. He has a website: http://honeycreekradio.com/ that you should visit and you'll be able to access his station from the site.

While the station is not unique -- there are hundreds of online stations broadcasting the same stuff as Honey Creek Radio -- I believe you'll experience a good musical vibe when listening to Honey Creek Radio. Music is changed every 2 to 3 days. Since January 2008 Honey Creek Radio has been listened to in over 40 countries. Some days no one listens while on other days, many tune in to listen to a great mix of Classical, Celtic, Folk, and Native American music. While we here in the USA sleep, there are people tuning into Honey Creek Radio to hear a wonderful mix of artists and albums of quiet -- and not so quiet -- Gospel Hymns.

But the really cool part, for me, is that he's made me some rolling ball commercials! It was pretty surreal when I was listening to the station the first time, and then all of the sudden a commercial for my rolling ball sculptures played... I am not sure what I felt. It was a very odd experience as I had several emotions at once. It was very, very cool. So since that time Dad has made me several commercials. Here are the two most recent:

Rolling Ball Ad 01
Rolling Ball Ad 02

Right click and save the ad to your desktop to play it. They are in mp3 format. Are you looking to have a commercial recorded? Go to his site and drop him an email. Dad, (Ed) would love to work out an awesome sounding commercial. With google adwords you can set up ads to play on the FM radio. And you'll need a commercial to do that...

I'm sure there will be more rolling ball ads, and I will post them when I get them. : )

Thanks, DAD!